I have inherited from my father, Terry Ives, a 1954 Triumph Tiger 100, the first of the swinging arm models. The crankshaft and rods had gone missing some years ago, as they do, so I endeavoured to source a replacement. The original one wou

Battery in the rear tail hump The electrics are much reduced from the standard bike. The generator has been replaced by a single phase lighter item. I got this from Cycle Exchange in the US who sell a lot parts for 750 fours, check out thei

Construction of the chassis is near complete. The photo above shows the bike nearing the end of the dry build phase and almost ready for strip down polish and paint. The plan is that all the alloy parts be polished and the frame painted a c

A customer recently bought his Honda CB750 four into our bike shop for restoration and complaining of gear shifting problems. After inspection I found there was a gear selection problem. My customer compounded this by saying he had trouble

One of the first jobs I did was to improve on the front brake, which might have been fine for 1969, but not now. The standard fork leg was cleaned, polished and machined to take the special brackets made here by Terry Ives. It was originall

Having rewired many motorcyles over the years I thought I would list the two most common problems I encounted whilst rewiring a Big Bear chopper recently. Obviously the most common of electrical problems is connections and this bike had mor

One of the first thoughts on this bike was to build a unique cafe racer styled machine. I really liked the look of the CR750’s, so I purchased the petrol and oil tank. I didn’t want  the engine to be covered and I wanted as much