The little bikes are quite easy to restore as there is not an inordinate amount of chroming involved, most of the paint work is black including the wheel rims and spokes. The BSA C11 of 1939 vintage is not a very common beast and some spare

Good heat resistant engine paints are getting difficult to source as some have stopped being produced due to regulations on there chemical make up and possible health hazards. For the home based motorcycle restorers, the preferred method of

I was asked by a company to produce some parts in a material that I was unaccustomed with, the material was called Ferralium. The part that I had to machine had very high tolerances involved in its production, a very small batch was needed

Wheel building is an art if it is done properly. Many wheel come into our work shop from all over the UK for rebuilding and refurbishing. For example a pair of wheels were bought to us that not only needed respoking but needed new rims as t

Honda CX 500   This is a typical enquiry that we receive on a regular basis. I feel it important to air this on our blog as it shows good reciprocation of information between us and the customer (Simon). Simon initially gave me a breakdown